Description
Wiring: Three phase, four wire / Three phase, three wire (CT/VT op only) / Single phase, two wire
Connection: CT operated
Voltage: 230V/400V
Amperage: Milli Amp
Frequency: 50Hz
Mounting: DIN Rail
Size: 4 module
Communication Output: Modbus (Autometers V6) and 2 pulse outputs (1 programmable)
Certification: MID approved, appendix “B” & “D”
Horizon Compatibility: Full
Tariffs: 4
The new MA-10 meter measures and displays the characteristics of single phase two wires (1p2w),three phase three wires (3p3w) and three phase four wires (3p4w) networks.The measuring parameters include voltage (V), frequency (Hz),current (A),power (kW/kVa/kVar),import, export and total Energy (kWh/kVarh).The units can also measure Maximum demand current and power, this is measured over preset periods of up to 60 minutes.
This unit is a milliAmp current transformer operated and can be configured to work with a wide range of CTs. Built-in pulse and RS 485 Modbus RTU outputs. Configuration is password protected.
The new MA-10 meter is supplied with an RS 485 Modbus protocol and 2 pulse outputs.
The Modbus output is defaulted to work directly with the Horizon data monitoring and invoicing system